Showing posts with label 0375. Show all posts
Showing posts with label 0375. Show all posts

White Translucent Retractable FEP Tubing, 0.250" ID, 0.375" OD, 0.063" Wall, 48" Length

White Translucent Retractable FEP Tubing, 0.250" ID, 0.375" OD, 0.063" Wall, 48" Length Reviews



Other Picture


FEP (Fluorinated Ethylene Propylene) retractable tubing coils are resistant to most industrial solvents, chemicals and corrosive materials even at elevated temperatures. The maximum operating temperature is 400 F however coils may start to lose there set above 200 degrees F. May be chemically sterilized or autoclaved but care should be taken to retain shape during steam sterilization.


Visit Store Now !!

Detail Products

Detail Reviews




Aug 25, 2011 17:52:31

Black Polyethylene (LLDPE) Tubing, 0.250" ID, 0.375" OD, 0.063" Wall, 100' Length

Black Polyethylene (LLDPE) Tubing, 0.250" ID, 0.375" OD, 0.063" Wall, 100' Length Reviews



Other Picture


Linear Low Density Polyethylene(LLDPE) Tubing offers enhanced resistance to stress cracking. Chemically inert; forms a good barrier to gases, vapors, and moisture. Does not impart a taste or odor. Made from non-toxic, 100 percent virgin-grade raw materials conforming to FDA standards. Low density is listed by the National Sanitation Foundation (NSF 51). Flexible, lightweight, durable and good dielectric properties.


Visit Store Now !!

Detail Products

Detail Reviews




Aug 04, 2011 18:51:03

Green Nylon 12 Flexible Tubing, 0.375" ID, 0.500" OD, 0.063" Wall, 10' Length

Green Nylon 12 Flexible Tubing, 0.375" ID, 0.500" OD, 0.063" Wall, 10' Length Reviews



Other Picture


Nylon 12 Flexible Tubing offers very low moisture absorption and will not become brittle or swell because of water. Excellent resistance to flexural fatigue, tube vibration and movement. Nylon 12 tubing is lightweight and posses outstanding bend radii and pressure ratings. It is also resistant to crushing, abrasion and cracking.


Visit Store Now !!

Detail Products

Detail Reviews




Aug 03, 2011 13:59:04

Red Nylon 12 Flexible Tubing, 0.375" ID, 0.500" OD, 0.063" Wall, 100' Length

Red Nylon 12 Flexible Tubing, 0.375" ID, 0.500" OD, 0.063" Wall, 100' Length Reviews



Other Picture


Nylon 12 Flexible Tubing offers very low moisture absorption and will not become brittle or swell because of water. Excellent resistance to flexural fatigue, tube vibration and movement. Nylon 12 tubing is lightweight and posses outstanding bend radii and pressure ratings. It is also resistant to crushing, abrasion and cracking.


Visit Store Now !!

Detail Products

Detail Reviews




Jul 20, 2011 11:54:06

Clear NSF-61 Polyurethane Tubing, 0.375" ID, 0.563" OD, 0.094" Wall, 100' Length

Clear NSF-61 Polyurethane Tubing, 0.375" ID, 0.563" OD, 0.094" Wall, 100' Length Reviews



Other Picture


Superthane ether-based polyurethane tubing is clear, flexible, resistant to oils, greases and fuels, resistant to weathering, tearing, impact, radiation and abrasion, and can withstand a temperature range of -90 Deg F to 175 Deg F. It contains no plasticizer that can cause flow contamination or tube hardening and is manufactured from FDA-sanctioned ingredients for use with wet and fatty food contact surfaces. Ether-based material is listed by the National Sanitation Foundation (NSF 61). This tubing can be heat sealed, coiled, fabricated or bonded. Common Applications: Granular Transfer Lines, Grease Lines, Insulating Sleeves, Metering Pumps, Nuclear Power Facilities, Oxygen and Other Gas Lines, Pressure Measuring Devices, Robotics, Slurry Transfer, Small Motor Fuel Lines, Transfer Lines for Clean Liquids, Transfer Lines for Internal Contamination Fluids, Vacuum Equipment


Visit Store Now !!

Detail Products

Detail Reviews




Jul 12, 2011 04:46:04

White Translucent Medical Grade SiliconeTubing, 0.375" ID, 0.500" OD, 0.063" Wall, 10' Length

White Translucent Medical Grade SiliconeTubing, 0.375" ID, 0.500" OD, 0.063" Wall, 10' Length Reviews



Other Picture


Silicon Med-X platinum-cured medical grade silicone tubing is manufactured under strict manufacturing procedures in a controlled environment. Silicone elastomer meets USP Class VI requirements. Platinu- cured for the highest degree of purity (least extractable), non-reactive to body tissues and fluids. It is also reusable and will withstand repeated sterilization. Some common applications: Beverage, Blood & Fluid Handling, Dialysis, Food, I.V. Administration, Laboratory, Medical, Personal Care, Pharmaceutical, Surgical Drains.


Visit Store Now !!

Detail Products

Detail Reviews




Jun 21, 2011 02:05:04

Clear NSF-61 Polyurethane Tubing, 0.375" ID, 0.563" OD, 0.094" Wall, 10' Length

Clear NSF-61 Polyurethane Tubing, 0.375" ID, 0.563" OD, 0.094" Wall, 10' Length Reviews



Other Picture


Superthane ether-based polyurethane tubing is clear, flexible, resistant to oils, greases and fuels, resistant to weathering, tearing, impact, radiation and abrasion, and can withstand a temperature range of -90 Deg F to 175 Deg F. It contains no plasticizer that can cause flow contamination or tube hardening and is manufactured from FDA-sanctioned ingredients for use with wet and fatty food contact surfaces. Ether-based material is listed by the National Sanitation Foundation (NSF 61). This tubing can be heat sealed, coiled, fabricated or bonded. Common Applications: Granular Transfer Lines, Grease Lines, Insulating Sleeves, Metering Pumps, Nuclear Power Facilities, Oxygen and Other Gas Lines, Pressure Measuring Devices, Robotics, Slurry Transfer, Small Motor Fuel Lines, Transfer Lines for Clean Liquids, Transfer Lines for Internal Contamination Fluids, Vacuum Equipment


Visit Store Now !!

Detail Products

Detail Reviews




Jun 07, 2011 08:49:05

White Translucent FEP Tubing, 0.375" ID, 0.500" OD, 0.063" Wall, 48" Length

White Translucent FEP Tubing, 0.375" ID, 0.500" OD, 0.063" Wall, 48" Length Reviews



Other Picture


FEP is in the family of fluoropolymers with similar properties to PTFE (sometimes branded as Teflon(R)). This tubing is transparent, has an excellent coefficient of friction slightly higher than PTFE, and is chemically resistant and considered inert. Maximum working temperature is 400F (204C). FEP is melt processable and can be formed into shapes, and it is weldable and thermoformable. The tubing is biocompatible certified to USP Class VI (chemical composition only). Sterilization methods include Gamma, ETO, e-beam and autoclaving.


Visit Store Now !!

Detail Products

Detail Reviews




Apr 28, 2011 13:13:04

White Translucent Medical Grade SiliconeTubing, 0.375" ID, 0.500" OD, 0.063" Wall, 25' Length

White Translucent Medical Grade SiliconeTubing, 0.375" ID, 0.500" OD, 0.063" Wall, 25' Length Reviews



Other Picture


Silicon Med-X platinum-cured medical grade silicone tubing is manufactured under strict manufacturing procedures in a controlled environment. Silicone elastomer meets USP Class VI requirements. Platinu- cured for the highest degree of purity (least extractable), non-reactive to body tissues and fluids. It is also reusable and will withstand repeated sterilization. Some common applications: Beverage, Blood & Fluid Handling, Dialysis, Food, I.V. Administration, Laboratory, Medical, Personal Care, Pharmaceutical, Surgical Drains.


Visit Store Now !!

Detail Products

Detail Reviews




Apr 10, 2011 11:43:05

Green Nylon 12 Flexible Tubing, 0.250" ID, 0.375" OD, 0.063" Wall, 100' Length

Green Nylon 12 Flexible Tubing, 0.250" ID, 0.375" OD, 0.063" Wall, 100' Length Reviews



Other Picture


Nylon 12 Flexible Tubing offers very low moisture absorption and will not become brittle or swell because of water. Excellent resistance to flexural fatigue, tube vibration and movement. Nylon 12 tubing is lightweight and posses outstanding bend radii and pressure ratings. It is also resistant to crushing, abrasion and cracking.


Visit Store Now !!

Detail Products

Detail Reviews




Mar 20, 2011 09:21:04

Natural Nylon 12 Semi-Rigid Tubing, 0.225" ID, 0.375" OD, 0.075" Wall, 25' Length

Natural Nylon 12 Semi-Rigid Tubing, 0.225" ID, 0.375" OD, 0.075" Wall, 25' Length Reviews



Other Picture


Nylon 12 Tubing - Very low moisture absorption: 1.4 percent maximum (at 73 Degrees F) Will not become brittle or swell because of water.Excellent resistance to flexural fatigue, tube vibration, and movement. Lightweight with excellent bend radii and pressure ratings. Resists crushing, abrasion,and cracking. Maximum operating temperature is 212 degrees F. Brittle temperature:-90 degrees F


Visit Store Now !!

Detail Products

Detail Reviews




Mar 13, 2011 07:05:03

White Translucent Medical Grade SiliconeTubing, 0.375" ID, 0.625" OD, 0.125" Wall, 10' Length

White Translucent Medical Grade SiliconeTubing, 0.375" ID, 0.625" OD, 0.125" Wall, 10' Length Reviews



Other Picture


Silicon Med-X platinum-cured medical grade silicone tubing is manufactured under strict manufacturing procedures in a controlled environment. Silicone elastomer meets USP Class VI requirements. Platinu- cured for the highest degree of purity (least extractable), non-reactive to body tissues and fluids. It is also reusable and will withstand repeated sterilization. Some common applications: Beverage, Blood & Fluid Handling, Dialysis, Food, I.V. Administration, Laboratory, Medical, Personal Care, Pharmaceutical, Surgical Drains.


Visit Store Now !!

Detail Products

Detail Reviews




Mar 12, 2011 10:39:05

Red Nylon 12 Flexible Tubing, 0.250" ID, 0.375" OD, 0.063" Wall, 10' Length

Red Nylon 12 Flexible Tubing, 0.250" ID, 0.375" OD, 0.063" Wall, 10' Length Reviews



Other Picture


Nylon 12 Flexible Tubing offers very low moisture absorption and will not become brittle or swell because of water. Excellent resistance to flexural fatigue, tube vibration and movement. Nylon 12 tubing is lightweight and posses outstanding bend radii and pressure ratings. It is also resistant to crushing, abrasion and cracking.


Visit Store Now !!

Detail Products

Detail Reviews




Feb 28, 2011 22:44:23